Model Number: HHMH-JB5
Brand Name: HHMH-JINBO
Key Specifications/Special Features:
About us:From 2009, HengHui MingHui-Jinbo starts to invest in R&D in the CNC coil-winding machine, until 2017, our company has generated the fifth generation, this machine is the first successful developed CNC full automatic coil winding machine in China.Our advantages compare with traditional winding machine: Compare with the traditional coil-winding machine, our self-developed CNC wire winding machine allows makes the wires evenly covers the rubber hose. The winding techniques for four or five layers, the difference is that the traditional wire-winding machine, however, the cover of wire is unevenly distributed, and the tensile strength is not properly allocated. This would result the traditional machine produce unstable rubber hose quality. Our self-developed technology allows us to use the tensile tester to make sure every axis have the same length and strength.The machine fulfills the National Standard of 540
44’ braiding angle. This angle makes the best tensile strength and quality. Unlike the traditional use the same four plats, however, set one plat 520
44’, and the second 560
44’, and get the average to meet the standard. However, this would makes the wire unevenly distributed on the rubber.We adopted the servo motor instead of frequency conversion motor, that allows the machine to overload 200% current. In addition, The servo motor largely saved the waste of unqualified rubber hose caused by transformation from low speed to standard speed and from standard speed to low speed.
The rubber hose enwind speed is steadily kept in 4.4m/min. Due to the high efficiency of the servomotor, thus all of the winded rubber hose are all qualified with extraordinary high security factor.
The rubber hose produced by our machine can reach the international standards of over 10,000,000 times of pulsating pressures. The quality is much higher and stable compare with rubber hose produced by traditional coil winding machines that only can bear 170,000 times of pulsating pressure, (The national standard is 400,000 times)
The use of Big Data and Internet allows us to remotely diagnose, repair and update programs. HHMH Jinbo will always provide the most reliable and efficient solutions.
The machine can produce rubber hose with diameters from 13mm to 64 mm, this producing ability largely exceed Korean producers the 51mm largest diameters. The thickest and thinnest rubber hose are tend in a poor quality due to the poor techniques and performance of traditional coil winding machines. However, HHMH-Jinbo self developed CNC coil wire winding machine can make sure that all customized requirements are produced in high quality standard.
|Main rotary table speed
|Steel wire amount
||Auto-customizable based on different techniques
||11.5 m ×1.8 m ×2.2 m
||1.6 m ×0.8 m ×2.0m
Dimensions per Unit:
11.5 × 1.8 × 2.2 Meters
Main Export Markets:
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Western Europe
Download more information about this product